JCS Technology

• Compression Testing
• Shear Testing
• Creep Testing

We  undertake a wide range of tensile testing at a range of temperatures

from -196 Deg C to 1200 Deg C .Testing can be conducted to a range of standards such as BS,EN,ISO,ASTM,DIN and BSS. Materials from composites. polymers, Fils and fabricts

Including

ASTM D638 Plastic,BS EN2597 UD Composite,BS EN ISO527 Various,BS EN2597 Composite, BS ISO37 Rubber to UKAS or ISO9001 accreditation

Compression testing is by its nature problematic. Using both national and international test standards we are able to standardise the support fixtures used as anti-buckling guides and where required use strain gauges to determine the compressive modulus. Testing can be conducted to a range of standards such as BS,EN,ISO,ASTM,DIN and BSS.

Including

ASTM D 3410 In-Plane Compression, BS EN ISO14126,In-Plane Compression

We are able to do 3 and 4 point flexural testing to both national and international standards and a range of tempertures. Testing can be conducted to a range of standards such as BS,EN,ISO,ASTM,DIN and BSS

Including

ISO178 Plastic ,ASTM D790 Plastic ,ASTM C393 sandwich , 

We offer a full range of shear testing including lap shear, in-plane shear and interlaminar shear testing. Using strain gauges to determine the in-plane shear modulus. Testing can be conducted to a range of standards such as BS,EN,ISO,ASTM,DIN and BSS

Including

BS EN ISO14129 In-plane shear, BS EN1465 Lap shear,BS EN 2563 ILSS

Interlaminar Shear Strength BS EN ISO 14130 and CRAG 100  UKAS Accredited

Pull tests tend to be product specific. We offer a full range of pull tests which can include strain gauging of the component or product and attachment jigs and fixtures.

Peel testing: Climbing drum, T-peel, Floating roller, 180 Deg Peel, Client methods